Soft Porcelain Wall Panels

Soft Porcelain Wall Panels, a flexible decorative wall material made from natural mineral powders (e.g., stone powder, clay), eco-friendly polymers, and additives, processed via calendering, molding, and high-temperature curing.

Brief Description

Blending the natural texture of traditional porcelain with flexible performance, this wall panel uses mineral-based raw materials to avoid brittleness. It is thin, lightweight, and easy to install, suitable for both indoor and outdoor wall decoration. It meets environmental standards, resists stains and weathering, and is an ideal alternative to rigid ceramic tiles or natural stone for walls.

Typical Applications

Indoor Walls: Living room TV backgrounds, bedroom accent walls, kitchen backsplashes, bathroom walls (moisture-proof type).
Outdoor Walls: Residential exterior cladding, commercial building facades (malls, hotels), community landscape walls.
Special Scenes: Curved wall decorations (lobbies, exhibition halls), renovation of old buildings (no need for heavy wall reinforcement).

Standard Sizes & Models

Sizes
Thickness: 3mm, 4mm, 5mm (common for wall use).
Width×Length: Standard sizes: 600×900mm, 600×1200mm, 800×1600mm; custom sizes available (max 1200×2400mm).

Models
By texture: Marble-patterned (SP-M), Granite-patterned (SP-G), Brick-textured (SP-B), Wood-grained (SP-W).
By use: Indoor-specific (SP-I, optimized for moisture control), Outdoor-specific (SP-O, enhanced weather resistance).

Specifications

FAQ

Q: Can it be used in wet areas like bathrooms?
A: Yes, choose indoor moisture-proof models (SP-I); seal joints with waterproof glue to prevent water seepage.

Q: Is professional installation required?
A: No—its lightweight design allows adhesive installation; just ensure the wall is flat and clean (DIY-friendly).

Q: Will it fade under outdoor sunlight?
A: Outdoor-specific models (SP-O) have enhanced UV protection; no obvious fading for 8-10 years under normal outdoor conditions.

Installation & Maintenance Tips

Pre-installation: Store in a dry, ventilated area; check walls for flatness and dryness.
Installation: Apply specialized wall adhesive to the panel back; press firmly against the wall for 5-10min; leave 1-2mm expansion gaps between panels.
Maintenance: Wipe stains with water or neutral detergent (avoid acid/alkali cleaners); repair small scratches with matching touch-up paint; check joints annually and re-seal if needed.